Difference between revisions of "Pneumatic Tubes"

From Dead Media Archive
Jump to: navigation, search
(Limitations: The Tube Strikes Back)
(Works Cited)
Line 61: Line 61:
  
 
Steinweg, Muhammad Hasan. "Time When Hot Air was Used to Ferry Mail." New Straights Times, September 4, 1995, Need to Know Kelantanese dealer, pg. 7.
 
Steinweg, Muhammad Hasan. "Time When Hot Air was Used to Ferry Mail." New Straights Times, September 4, 1995, Need to Know Kelantanese dealer, pg. 7.
 +
 +
 +
 +
--EDIT: need to add Hero of Alexandria, Chicago Daily Tribune, Atlanta Constitution, Brisbane's Patent--

Revision as of 09:13, 17 October 2007

Description of medium here.

The Beginnings: Pressurized Air and Patents

Although pneumatic tubes in their physical form were not invented until the late 1800s, the idea that pressurized air could be used to propel objects through empty vessels has been explored since antiquity. One of the earliest instances of such research occurred in Ancient Greece, when Hero of Alexandria completed his treatise on pneumatics. Exactly when "The Pneumatics" (or "Pneumatica") of Hero of Alexandria was published is still up for debate, though most scholars agree that he lived in the first century BC. Regardless, Hero of Alexandria’s "Pneumatica" assumed that “…air is matter. The air when set in motion becomes wind, (for wind is nothing else but air in motion)” (Hero of Alexandria 2). He found that “if from the application of force of the particles of air be divided and a vacuum be produced larger than is natural, the particles unite again afterwards; for bodies will have a rapid motion through a vacuum, where there is nothing to obstruct or repel them, until they are in contact” (Hero of Alexandria 3). In other words, air is excessively dense yet its particles are extremely flexible; when it is compressed, it will fall into empty spaces from the pressure exerted upon its particles. This creates a “vacuum” which, as Hero of Alexandria explores in his book, can put objects and machines in motion by the force of air.

Error creating thumbnail: Unable to save thumbnail to destination
Fig. 1: The original, rectangular pneumatic "tube." / Fig. 2: Albert Brisbane's improvement, and the tube we recognize today.

While none of the nineteenth-century patents or articles dealing with pneumatic tubes cite Hero of Alexandria’s treatise, one can infer that his research informed the workings of this dead medium over one thousand years later. In a way, the pneumatic tube is a remediation of Hero of Alexandria’s early pneumatic devices. But even though we can trace pneumatics into antiquity, the actual “invention” of the pneumatic tube has a history that is complicated and confusing. The pneumatic tube’s invention cannot be traced back to a sole “inventor,” but rather a baffling hodge-podge of patents and improvements. This surge of innovation speaks to the moment of mass invention and production associated with the late 1800s and the Industrial Revolution; there are literally hundreds of patents involving pneumatic tubes between 1870 and 1900 alone.

Despite this puzzling array of information, one man is credited with “inventing” the pneumatic tube that coiled itself ‘round the world: Albert Brisbane. An American from New York City, Brisbane patented the “Improved Pneumatic Tube for Transporting Goods” (U.S. Patent No. 91513; Dated June 22, 1869). The language of this patent makes it plain that he did not invent this technology, but instead made vast improvements upon the original, which consisted of an oddly shaped “rectangular pneumatic tube or box, containing a hollow cylinder, running on rails, for the transportation of mails and merchandise” (U.S. Patent No. 91513). It is no wonder, then, why several newspapers at the time accredited Brisbane with inventing the pneumatic tube – he essentially remediated a rectangular box with rails into a pragmatic “round pneumatic tube, containing a hollow sphere or ball” for transporting goods (U.S. Patent No. 91513).

From the perspective of media archaeology, one can sense that this remediation had strong economic motivations. Basic physics reveals that a spherical object sent down a round tube will create less friction than a cylinder sent down a rectangular “tube” on rails. Time is clearly of the essence here; this technology would have been utterly useless had it not been extremely timesaving. Additionally, Brisbane’s patent addresses preventing air leakage by narrowing the sides of the hollow spheres, further emphasizing timesaving strategies. Less air leakage meant more air pressure applied to a narrower space, pushing the object down at much quicker speeds. And of course, one cannot forget the strongest economic motivation in improving a medium: money. Brisbane’s patent goes the extra mile by making suggestions for the “cheapest” structure of his pneumatic tube.

Limitations: The Tube Strikes Back

Error creating thumbnail: Unable to save thumbnail to destination
"The Pneumatic Tube of the Future" from New York to Boston (The Atlanta Constitution, 1896). Though many saw "great" possibilities for the pneumatic tube, endeavors like this were never realized due to practical limitations of the technology.

Like any medium, the pneumatic tube has certain limitations within itself. We cannot then just focus on the people and events surrounding the medium, but also the traits of the material object itself – traits that will fight back. It is plain that the physical (the visible and tangible) are favored in this medium, since a physical object (i.e. a written letter) must be placed within a “carrier” which is then sent through a tube to a certain destination. This clearly had its advantages: quick communication over short distances that had a personal touch to boot. At the same time, however, this meant that restrictions had to be placed upon the object itself and where it could be sent. Initially, before realizing the drawbacks of the technology, many imagined that long pipelines of pneumatic tubes could be constructed from say, New York to California. Soon enough, people realized that the “pneumatic plan…proved to be practicable when applied to short distances,” such as within a metropolitan area (Chicago Daily Tribune).

The length of the tubes did not only inhibit communication, but additionally pieces of mail had to fit within a pneumatic tube parcel or otherwise travel by regular post. While this limitation may not seem too pressing, since other avenues of quick communication were available at the time, it actually had significant impacts. In 1925, the New York Times reported one particularly dramatic instance, wherein a Parisian man killed himself after his girlfriend failed to send him a letter by pneumatic tube. The Times claimed that when this man parted from “an English girl whom he loved, she said she would either send him a ‘pneumatique’ (special delivery) message within three hours or never see him again.” This woman made the unfortunate mistake of placing the letter “in an envelope too large for the Paris pneumatic tube system for fast mail,” and it “arrived by ordinary post too late to prevent the suicide” (New York Times).

---EDIT: Talk about clogs & money here---

Pneumatic Mail in Europe

Error creating thumbnail: Unable to save thumbnail to destination
1884 Paris's Pneumatic Tubes

The "Tubes Pneumatique" of Paris date as far back as 1867. The first tubes connected the Bourse or stock exchange and the Grand Hotel beginning what would become an enormous system several hundred miles in tubes (Scientific American 1884). Like the system used in America, the tube is filled with compressed air in a partial vacuum. Instead of using air pumps or any engines, the Parisian system worked using power from the city's reservoir. Originally there were three large connected iron plated vessels that could hold 1,200 gallons each. The first vessel was filled with water, which was pushed into the other two vessels, which were filled with air. The air becomes compressed and once a valve was opened the air escaped rushing with force into the tubes (London Engineer).

Error creating thumbnail: Unable to save thumbnail to destination
Prague's central office featuring historical working pneumatic post system

The height of pneumatic post in Paris was in the 1930's where a letter, which the French called a "pneu" could get anywhere in the city in about an hour. 240 miles of tubing, just a few meters under the ground, created the net like system that laid just underneath Paris, carrying letter at an average speed of 40 m.p.h. After World War II the system was expanded and modernized but eventually began to decline and the Parisian pneumatic postal system ended in 1984 (Vinocur).

The Prague pneumatic post was completed in 1899 with 60 kilometers that could transport letter, documents, and small parcel at 30 m.p.h. Prague's pneumatic post is the only working historical model left in the world. Today not much has changed except the number of parcel sent which use to number in the millions each year and now has dwindled into thousands every month. The post employs fifteen people altogether¬– nine workers and six dispatchers. Incoming parcels are indicated by a blinking red light and outgoing parcels by a green light. Every parcel must make a stop on Jindrisska street as the network is star shaped (Drake). Pneumatic postal networks are so much like highways, it is no wonder the word 'pneu' is also the French word for car tire.

Telegrams vs. Pneumatic Post

The telegram and pneumatic post are in many ways very similar, but it was because of the traffic over the electrical lines that "pneumatic telegraph" was quickly and widely popular in Paris. For a while to relieve the heavy pressure on telegraphs, telegrams were delivered by couriers on bicycles, especially to and from the Bourse during business hours. After a line was created connecting the Bourse and the Grand Hotel, new lines and stations were created rapidly and thousands of telegrams were sent over pneumatic airwaves daily (Morss).

Telegrams and pneus were responsible for informing generations of births, deaths, marriages, lottery winners, and broken dates. Pneus were best used sending theatre tickets or contracts, which could not only hold small pieces of paper but could be written in someone's own handwriting (Vinocur). Telegrams had their own language of quickness and saturated content because of the cost per word. As 'tele-' means far in Greek and 'gram' means written or writing, 'pneuma' means soul or vital spirit. In François Truffaut's 1968 film Baisers Volès (Stolen Kisses), a love letter is sent through the rattling sewers and underground of the city to unite two lovers. Pneumatic tubes held a spiritual meaning. In theology, "pneumatology" was the belief in "intermediary spirits" whether between man and man or man and God (Steinweg).

Pneumatic Scandal in NYC

Pneumatic Transporation

"The Pneumatic Age"

Error creating thumbnail: Unable to save thumbnail to destination
Mmm...



Works Cited

"The Pneumatic Telegraph Lines of Paris." Scientific American (1845-1908); Dec13, 1884: Vol.LI, No. 24; APS Online pg. 395

London Engineer. "The Pneumatic Dispatch Tube in Paris." New York Observer and Chronicle (1833-1912); May 16, 1867; 45, 20; APS Online pg. 157.

Vinocur, John. "Paris Pneumatique is Now a Dead Letter." The New York Times, March 31, 1984, Saturday, Late City Final Edition, Section 1; Page 29, Column 2; Style Desk, 723 words.

Drake, James. "A Relic That Hasn't Gone Down the Tubes." Business Week, October 8, 2001, Business Week International Editions; Letter From Prague; Number 3752; Pg. 4, 1435 words.

Morss, Samuel E. "The Pneumatic Telegraphs of Paris," The American Architect and Building News (1876-1908); Feb 16, 1895; 47, 999; APS Online pg. 74

Steinweg, Muhammad Hasan. "Time When Hot Air was Used to Ferry Mail." New Straights Times, September 4, 1995, Need to Know Kelantanese dealer, pg. 7.


--EDIT: need to add Hero of Alexandria, Chicago Daily Tribune, Atlanta Constitution, Brisbane's Patent--