Difference between revisions of "Glass Harmonica"
|Line 16:||Line 16:|
Revision as of 01:27, 14 November 2007
Structure of Harmonica
One full octive (48 notes, two octaves above and below middle C) of finely tuned glass cups were turned on their side and fit within each other almost to the point of touching. They were all mounted on a driveshaft controlled by a motor powered by the users foot and were seperated and secured to the driveshaft by corks inserted into the bottom of the bowls. Sometimes a moisturizer was used spraying the cups lightly at the bottom of the instrument to keep them constantly moisturized. However, most of the time, the moisture came from the players fingertips. This became an improvement on the traditional musical glass arrangement because, "The instrument could be played much more like a piano; chords and faster musical passages would be easier to achieve, since one would not awkwardly have to coordinate turning one's finger around the rim of each glass." (Finkenbeiner 139)
Creating porperly tuned glass bowls was extremely difficult. Each bowl was hand blown making every set different from the others. In fact, only one bowl out of every 100 blown was the proper size and tune. Thus, the completion of an entire four-octave Glass Harmonica was a strenuous and inconsistant task. The glass used also is believed to be one of the reasons for its downfall and disapperance into obscurity. There was a high amount of lead in the glass and many years later it was theorized that people went mad when they played it. The lead would, "Leach through the fingertips into the bloodstream.. causing nerve damage." (Finkenbeiner 140)